Guide to Candle Tunnelling

Guide to Candle Tunnelling

What is candle tunnelling?

Along your candle making journey it's highly likely you've encountered a situation when your candle hasn't been able to burn from edge-to-edge, forming a circular 'tunnel' around the wick and down through the core of the candle.

This extremely common phenomenon is known as 'tunnelling'. No candle is immune from potentially tunnelling whether you're burning a £245 Gucci Candle or a cheap and cheerful Aldi Special candle. 

Whilst visually unpleasant, and leading to wasted, unburnt wax, candle tunnelling is completely normal and, if you treat your candle correctly, avoidable.

Common causes of candle tunnelling?

Some of the most common causes of candle tunnelling are highlighted below. Having a good understanding of what causes your candles to tunnel, will help you prevent it in future.

  • Irregular burning practices: Candles should always burn for long enough so that the wax pool has enough time to reach the edges of the candle vessel. Extinguishing a candle too early may lead to the formation of a tunnel. To ensure your customers do not make this mistake be sure to educate them! It is good practice to send with your orders our Candle Care Cards

  • Incorrect wick size: A very common cause of tunnelling is the usage of a wick too small for the volume of wax or the width of your vessel. A wick which is too small may, despite its best efforts, not have enough power to burn the wax from edge to edge.
    (Hint: check out our wick blog to help you choose the right wick!)

  • Unsuitable wax blend: An often-overlooked element as a cause for candle tunnelling is the type of wax used in the creation of the candle. Some waxes, like our A27 Performance Soy Blend have been developed to be intentionally 'harder' meaning it has a higher melting point, making it a denser wax,  this wax will require a bigger wick than say, our A05 CocoSoy is noticeably 'softer'
    It's crucial when choosing your wax, you choose one 'fit for purpose' to try and prevent issues like tunnelling.

How to fix a tunnelling candle

There are a number of ways to fix a candle which has tunnelled, including using a heatgun to blast the edges of unmelted wax, however, our favourite way is the tin foil method.

Essentially, you can use tin-foil to create a dome around the top of your container candle, reflecting the heat back onto the unburnt wax, causing it to liquefy and join the already melting wax pool. We figured, rather than spending too much time explaining it - a short video will do a better job. Check out below for a 1:44 minute video which shows you step by step how to fix a tunnelling candle.

https://youtu.be/lQMZFIKOSs0 

How can you prevent Candle Tunnelling?

We've gone through what candle tunnelling is, what the causes are and how to fix a tunnelling candle, however, as they say, prevention is better than a cure. To prevent candle tunnelling when making candles always follow these steps:

  1. Ensure you're using the correct wick for your jar size (always test!)

  2. Use an appropriate wax type for the type of candle you're making

  3. Don't overload your candle with thick, viscous fragrance oil (this can make your wax harder to burn through)

When on-selling your candles, always mention to your customer to burn the candle from edge-to-edge. 

Download and use the free testing sheet put together by All Seasons Wax Company to fine-tune your process and research how to get the best result.